Enter IP Address: 192.168.1.200:1.5 and Subnet Mask: 255.255.255.0 and confirm with OK
Make sure that the IP address on the LAN is not already taken. In case it is taken, adjustments are necessary.
(192.168.1.x; x = 2…199, 201…255)
Now connect your device to the CMS-700 control unit
—
Web User Interface Overview
The web user interface is designed for use on browser-based devices.
The recommended web browser is Google Chrome, other supported
web browsers are Safari, Firefox, Opera, Internet Explorer.
—
Start Screen (Login)
Insert the IP address of the device in the browser address bar.
To access the web browser, it is also important to define port number 8000.
Factory settings with
Fallback IP: 192.168.1.200:8000
Fallback login - username: admin, password: admin
Please note that the control unit uses a secure https:// connection and port 7999.
First, it is necessary to confirm the secure connection. Later on you won’t be asked to confirm it
provided that you upload the SSL Certificate as described in the dedicated section.
After login, you will be asked to change the login data. It is highly recommended to change the login
data as soon as possible for security reasons. The new password must contain minimum 8 characters,
at least one uppercase letter and one number.
To Next Page
Loading...
Need help?
General
