25
TRANSFORMER COMPONENTS
—
15. Movement, transport and storage
Note
The Comem DTI/eDTI temperature monitoring devices are shipped
inside a cardboard box to facilitate transport and storage.
As soon as the temperature monitoring device Comem DTI is
received, the customer must perform the following operations:
• examine the outer packaging surface to be sure that it is intact
• check that there are no breakages
If damage is found, please contact ABB and provide the shipping
data together with the serial number of the unit.
The temperature monitoring device Comem DTI/eDTI must be
stored in a dry place at temperatures as indicated on page 23.
To Next Page
Loading...
Need help?
General
