ABB DSQC 688 User Manual

5.2 Industrial Network
5.2.1 Address
Parent
Address belongs to the type Industrial Network, in the topic I/O System.
Cfg name
Address
Description
The parameter Address specifies the IP address of the PROFINET anybus adapter
on the network. This IP address is used by an external controller to set up a
connection to the anybus adapter.
Usage
The address decides what address the master and any internal slave device should
use to communicate with other devices on the industrial network.
Usage
The parameter Address is used to set the IP address of the IRC5 controller on the
used network interface.
Allowed values
0.0.0.0 - 255.255.255.255
36 Application manual - PROFINET Anybus Device
3HAC050968-001 Revision: C
© Copyright 2008-2016 ABB. All rights reserved.
5 System parameters
5.2.1 Address

ABB DSQC 688 Specifications

General

Brand	ABB
Model	DSQC 688
Category	Controller
Language	English