5.2.3 Gateway
Parent
Gateway belongs to the type Industrial Network, in the topic I/O System.
Cfg name
Gateway
Description
The parameter Gateway specifies the node on the network that serves as an
entrance to another network.
Usage
This parameter is used to route messages to other logical networks. This
functionality is currently not supported.
Prerequisites
The option PROFINET Anybus Device must be installed.
Default value
0.0.0.0
Allowed values
0.0.0.0 - 255.255.255.255
38 Application manual - PROFINET Anybus Device
3HAC050968-001 Revision: C
© Copyright 2008-2016 ABB. All rights reserved.
5 System parameters
5.2.3 Gateway
To Next Page
Loading...
Need help?
General
