5.2.4 PROFINET Station Name
Parent
PROFINET Station Name belongs to the type Industrial Network, in the topic I/O
System.
Cfg name
StationName
Description
PROFINET Station Name specifies the PROFINET station name on the network of
the IRC5 controller.
Usage
The parameter PROFINET Station Name is used to identify a PROFINET device
on the network. The name must be unique on the network.
The parameter PROFINET Station Name can also be changed with an external
PROFINET configuration tool or a connecting PROFINET master.
Prerequisites
The option PROFINET Anybus Device must be installed.
Default value
The default value is an empty string.
Allowed values
A string with maximum 80 characters.
Allowed characters:
• 0-9 (numerical)
• A-Z (uppercase letters)
• a-z (lowercase letters)
• - (hyphen)
• . (full stop)
Application manual - PROFINET Anybus Device 39
3HAC050968-001 Revision: C
© Copyright 2008-2016 ABB. All rights reserved.
5 System parameters
5.2.4 PROFINET Station Name
To Next Page
Loading...
Need help?
General
