ABB Navigator 600 Series User Manual

Navigator 600 Series Analyzers
AW641 and AW642 3 Network Connection and Configuration
IM/NAV6PBS Issue 1 5
3.2 Network Configuration
To configure Profibus communications, refer to Section 11.6 of the User Guide relevant to the analyzer model and access the
Profibus tab:
Note. A Navigator 600 Series analyzer is not configured using Profibus commands but via the analyzer's keypad and menu
system.
Fields Description
Slave Address
A unique identifying number for the analyzer from 1 to 126.
A default address of 6 is set in the factory before shipping. This address can be changed to any value
from 1 to 125 to enable the analyzer to be visible on a Profibus system.

ABB Navigator 600 Series Specifications

General

Brand	ABB
Model	Navigator 600 Series
Category	Measuring Instruments
Language	English