ABB REF 54 Series User Manual

1MRS 750500-MUM
)HHGHU7HUPLQDODQG0DFKLQH7HUPLQDO
Operator’s Manual
5(BB
9
)LJ 'LVSOD\
In idle mode, the configuration picture (designed with the Relay Configuration Tool
and the Relay Mimic Editor) in the MIMIC view shows the status of CB(s) and
disconnectors.
 $VVLVWLQJZLQGRZ
The assisting window provides two kinds of messages with detailed data of the
terminal itself, protection functions, etc.:
• user help messages during operation
• indication messages
The assisting window is always visible, independent of the main window.
 'LVSOD\WHVWDWSRZHUXS
When auxiliary voltage is connected to the terminal, the backlight goes on and a
short display test is run. The test includes the LED indicators and the display:
• First, the nine alarm LED indicators are activated simultaneously with different
colours (red
→ green → yellow - OFF). At the same time, the three protection
LED indicators and the remote/local/disabled/logic LED indicators are activated
for a short time (3 cycles for the LED indicators).
• The LCD display is tested by inverting the display for a short time
After the display test, the display panel turns to the normal state (MIMIC view) and
the backlight turns off after the preset time-out.
 %XWW RQLQWU RGXFWLRQ
 1DYLJDWLRQFOHDUDQGHQWHUEXWWRQV
The HMI includes push-buttons for manipulating the terminal.
At technical level, a quick touch on the [
↑] or [↓] button (less than 1 second) is
interpreted as
• one step upwards or downwards in a menu
• If the cursor is on the topmost row, pressing [
↑] moves the cursor to the last
row of the menu
mainw
R
L
R
L
21 kV
CB OK
AROFF
I
0
F
Assisting
window
2 rows
Main window
17 rows
Graphical
LCD-display
Main window,
detailed information on:
- objects
- events
- measurements
- alarms
- parameters
Assisting window:
- indication messages
- help messages

ABB REF 54 Series Specifications

General

Brand	ABB
Model	REF 54 Series
Category	Touch terminals
Language	English