1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\LANGUAGE and press
to
enter the currently valid language.
3. Press
to enter the setting mode and give the password if required. The second
line starts to flash indicating that you are allowed to set the language.
4. Use
or to move the cursor to the wanted language.
5. Press
to confirm the selection. The selected language is shown on the display.
6. Press
to return the display to the idle mode.
By pressing
before confirming the selection, the former language remains active
and the display is returned to the view mode. Pressing
again returns the display
to the idle mode.
TRIP CIRCUIT SUP
Main Menu
Group Menu
Parameter Menu
Confirm
Cancel
SETTINGS
CONFIGURATION
MEASUREMENTS
RECORDED DATA
FUNCTION TEST/DI
COMMUNICATION
LANGUAGE
FREQUENCY
CONFIGURATION
CONFIGURATION
MEMORY SETTINGS
HMI PASSWORDS
TIME
RTD INPUTS
INFO
ENGLISH
STORE COUNTER
ESPAÑOL
PORTUGUÊS
A070064
Fig. 4.1.8.-1 Selecting language
The list of languages in the language selection menu differs depending
on the HMI language set number in the order number.
4.1.9. How to set the real-time clock
The real-time clock used for time-stamped events is set via two different settings,
one for Year-Month-Day and another for Hours-Minutes-Seconds.
To change one setting or both settings:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\TIME and press
.
3. Use
or to select the parameter to be edited.
22
REM 610REM 610
Motor Protection Relay
Operator's Manual - ANSI ve rsion
1MRS755538
To Next Page
Loading...
Need help?
General
