ABB REM 610 User Manual

+
- ABB -
Ia x.xx Ib x.xx
Ic x.xx In x.xx
Fig. 4.2.1.2.-2 Activating the monitoring state
Before you can monitor the correct primary current values, the
parameters M80 and M83 must be correctly set via serial
communication.
4.2.1.3. How to monitor recorded data
The contents of the event register and the information on motor start ups are found
under the main menu group RECORDED DATA.
1. Press an arrow button to access the main menu.
2. Use
or to select RECORDED DATA in the main menu and press to enter
the first event.
3. To navigate between the events, use
and .
4. To enter a submenu, use
and to exit, use .
5. To return the display to the idle mode, press
.
28
REM 610REM 610
Motor Protection Relay
Operator's Manual - ANSI ve rsion
1MRS755538

ABB REM 610 Specifications

General

Brand	ABB
Model	REM 610
Category	Relays
Language	English