ABB SACE Tmax XT5 User Manual

ABB | SACE Tmax XT
Internal accessories | 4 - Ekip Com EtherNet/IP TM183 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
Remote information
Additional information can be accessed via the service connector (via Ekip Connect) or via a system bus
communication:
Parameter Description
HW and Boot version general module information
Flash CRC status and result Information about the correctness of the SW in the module
Ekip Link status Signals Ethernet cable connection errors
SNTP Server Error Error in communication with SNTP server
SNTP Server Synchronization State of synchronism with SNTP server
IEEE 1558 status
Valid with Master IEEE 1588= ON, notifies the presence (Slave or PTP
Master Active) or absence (PTP Master but Passive) of a higher level
master

ABB SACE Tmax XT5 Specifications

General

Brand	ABB
Model	SACE Tmax XT5
Category	Circuit breakers
Language	English