DANGER
Hazardous voltage
Instructions:
1. Always switch off the input circuit feeding the unit, (external
disconnect or breaker) before performing any installation,
disassembly, repair or replacement of components. Follow
appropriate requirements for safe work practices, including but not
limited to NFPA-70e.
2. Perform a voltage check to ensure electrical power is
disconnected from the system.
3. Only ABB certified technicians should commission the Terra DC
Wallbox.
4. When the system is in an open or dangerous condition, do not
allow unqualified persons to go near it. Instruct and warn people
about the potentially harmful high voltages.
5. The installation and maintenance personnel must supply their
own lighting equipment because the Terra DC Wallbox has no lights
inside the cabinet.
6. Always connect the Protective Earth (PE) first, before connecting
the other power input wires.
7. Be sure to properly and securely reassemble the Terra DC
Wallbox’s enclosure after installation or service operations.
8. When handling the equipment, a proper lifting device should be
used in accordance with your local EHS policies.
To Next Page
Loading...
Need help?
General
