ABB Terra 24 User Manual

TERR A DC WA LLBOX
2023 -06-20 30/39
11. Attach the four wires on to their connectors as indicated on the label on the relative terminal
block (see the following picture as example).
• From left to right for the 3-phase unit (as showed in the following picture):
N - terminal block blue, L1 - terminal block grey, L2 - terminal block grey, L3 - terminal block
grey
12. Tighten the bolts. The advised torque value is 2.9Nm.
5.6 Instruction for Mounting the DC Wallbox Gun Holders
5.6.1 General
This document is intended to provide an instruction for service team / installers in order to be able
to properly install the terra DC wallbox gun holders.
5.6.2 General description
The Terra DC wallbox is provided with two types of gun holders. A standard gun holder is provided
with all the DC wallboxes. The standard Terra DC wallbox gun holder is illustrated in Fig.1 and
Fig.2. An optional gun holder is also available as an optional / spare part and can be ordered as
external kit. The optional gun holder is illustrated in Fig. 3 and 4. All the above described gun
holders include adapters for CCS or Chademo charging guns.
5.6.3 Mounting instructions
The gun holders described above are intended for a very simple installation. Standard gun holder
is provided with 3 holes for wall hooking while optional one is provided with a wall mounted hooking
bar (10 in Fig.3) to be mounted to wall. The recommended dowels to be used are of 10 size for both
cases.
Figure 1: Series production Terra DC
wallbox gun holder (Chademo model).
Figure 2: Series production Terra DC
wallbox gun holder (CCS model).

ABB Terra 24 Specifications

General

Brand	ABB
Model	Terra 24
Category	Battery Charger
Language	English