Absen HC Series User Manual

- 22 - New HC Series User Manual
❸ Remove the power supply and
network cable from the HUB, and
remove the HUB.
Receiving card Maintenance
Procedure
Diagram
❶Use the PH2 cross screwdriver,
remove the two screws of the fixed
receiving card and replace the
failure card.
Power supply Maintenance
Procedure
Diagram
❶ Use the PH2 cross screwdriver
to remove the PM3 round head
screw that fixes the power supply.
❷Remove the black insulation.
Remove the PM2 round head screw
fixing the power supply using a PH00
cross screwdriver. Then the power
supply can be removed.
Maintenance instructions: If you cannot determine the cause of the fault or do not
understand how to replace the spare parts, please contact Absen!

Absen HC Series Specifications

General

Brand	Absen
Model	HC Series
Category	Monitor
Language	English