22
Initial steps before testing
If you continue to hold down the M button, you then see the following
display after approximately 2 seconds.
mmol/L meter mg/dL meter
or
When you release the M button, your meter is in memory mode. As long
as no results have yet been saved, three bars are displayed.
Press the Test button to turn the meter off.
AC_CP_LCM_Manual_EN-UK final.indd 22_CP_LCM_Manual_EN-UK final.indd 22 20.6.2007 11:03:5820.6.2007 11:03:58