To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Accu-Chek Compact Plus and is the answer not in the manual?
General| Measurement Range | 10-600 mg/dL |
|---|---|
| Sample Size | 1.5 µL |
| Test Time | 5 seconds |
| Automatic Coding | Yes |
| Display | LCD |
| Measurement Method | Electrochemical |
| Battery Type | 2 x AAA |
| Battery Life | Approx. 1000 tests |
| Data Transfer | Infrared (IR) |
| Storage Conditions | -25°C to +70°C |
| Operating Conditions | 10-40°C, 10-90% RH |
Highlights key features like docked lancing, test strip drums, luminous display, and automatic coding.
Step-by-step guide on how to insert or replace the test strip drum in the meter.
Understanding the 90-day use-by period for test strip drums and its implications.
Configuring beep tones and activating Acoustic Mode for auditory feedback.
Configuring a low blood glucose level alert to warn of potential hypoglycemia.
Step-by-step guide on how to insert a new lancet into the lancing device.
Steps to turn on the meter and prepare for a blood glucose measurement.
Techniques and settings for obtaining an adequate blood drop.
How to apply the blood sample to the test strip for measurement.
Guidance on interpreting test results and when to perform control tests.
Checking common causes for implausible results or error messages.
Instructions for transferring test results wirelessly to a computer or PDA.
Step-by-step guide on how to conduct a control test using control solution.
Identifying potential causes for control test results outside the expected range.
Specific steps for healthcare professionals when testing multiple patients.
Instructions for disinfecting contaminated parts of the meter.
Optimal temperature and humidity for meter operation and storage.
Identifying causes and solutions for meter interferences and error messages.
Steps for collecting blood from alternate sites using the AST cap.
How to contact Customer Care for operational advice or troubleshooting help.
