Accu-Chek Nano User Manual

86
The time and date settings may be
incorrect. Make sure the time and
date are correct and adjust, if
necessary.
The batteries are almost out of
power. Change the batteries now. If
the message reappears after the
batteries have been replaced, reset
the meter. To reset the meter, slide
the battery drawer out of the meter,
press any meter button, then reinsert
the battery drawer back into
position.
NOTE
If you see any other error display, contact the ACCU‑CHEK Customer Care Service Center at
1‑800‑858‑8072.

Accu-Chek Nano Specifications

General

Display Type	LCD
Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	500 results
Automatic Power Off	Yes
Memory	500 results
Dimensions	69 x 43 x 20 mm
Weight	40 g with batteries
Measuring Range	0.6 - 33.3 mmol/L
Operating Conditions	10 - 90% relative humidity