EasyManuals Logo
Home>Acer>Server>AC100

Acer AC100 User Manual

Acer AC100
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
74 Chapter 6
System Check Procedures
Power system check
If the system will power on, skip this section. Refer to System External Inspection.
If the system will not power on, check if the power cable is properly connected to the system and AC source.
System external inspection
1. Inspect the LED indicators on the front panel, which can indicate the malfunction. For the LED locations
and description of their behaviour, see “System LED Indicators” on page 6.
2. Make sure that air flow is not blocked.
3. Make sure nothing in the system is making contact that could short out power.
4. If the problem is not evident, continue with System Internal Inspection.
System internal inspection
1. Turn off the system and all the peripherals connected to it.
2. Unplug the power cord from the power outlets.
3. Unplug the power cord from the system.
4. Unplug all peripheral cables from the system.
5. Place the system unit on a flat, stable surface.
6. Remove the system cover. For instructions on removing system cover, refer to “Removing the System
Cover” on page 30.
7. Verify that components are properly seated.
8. Verify that all cable connectors inside the system are firmly and correctly attached to their appropriate
connectors.
9. Verify that all components are Acer-qualified and supported.
10. Replace the system cover.
11. Power on the system.
12. If the problem with the system is not evident, you can try viewing the POST messages and BIOS event
logs during the system startup.

Table of Contents

Other manuals for Acer AC100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer AC100 and is the answer not in the manual?

Acer AC100 Specifications

General IconGeneral
Tcase69.1 °C
Bus typeDMI
FSB ParityNo
Processor cache3 MB
Processor cores2
Processor modeli3-2120
System bus rate5 GT/s
Processor familyIntel® Core™ i3
Processor seriesIntel Core i3-2100 Desktop Series
Processor socketLGA 1155 (Socket H2)
Processor threads4
Processor codenameSandy Bridge
Execute Disable BitYes
Motherboard chipsetIntel® C206
Processor frequency3.3 GHz
Processor cache typeSmart Cache
Processor lithography32 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor front side bus- MHz
Processor operating modes64-bit
Supported instruction setsAVX
Thermal Design Power (TDP)65 W
Number of processors installed1
CPU multiplier (bus/core ratio)33
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3 1066/1333
Memory channels supported by processorDual
Memory bandwidth supported by processor (max)21 GB/s
Maximum internal memory supported by processor32 GB
HDD size3.5 \
HDD speed7200 RPM
RAID levels0, 1, 5
HDD interfaceSerial ATA II
Total storage capacity2000 GB
Maximum storage capacity- TB
Internal memory4 GB
Memory clock speed1333 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory16 GB
Graphics cardHD Graphics 2000
Cabling technology10/100/1000Base-T(X)
PS/2 ports quantity0
USB 2.0 ports quantity6
PCI Express slots version2.0
Power supply200 W
Redundant power supply (RPS) support-
Cables includedAC
Compatible operating systemsWindows Small Business Server, Microsoft Windows Server, Red Hat Enterprise Server, SuSE Linux Enterprise Server
Sustainability certificatesENERGY STAR
CertificationFCC B, CE, CB, UL
Chassis typeTower
Processor ARK ID53426
Intel Identity Protection Technology version1.00
On-board graphics card ID0x102
On-board graphics card modelIntel® HD Graphics 2000
On-board graphics card familyIntel® HD Graphics
On-board graphics card base frequency850 MHz
On-board graphics card dynamic frequency (max)1100 MHz
Weight and Dimensions IconWeight and Dimensions
Width- mm

Related product manuals