Acer AC100 User Manual

80 Chapter 7
Entering the BIOS Setup Utility
1. Turn on the computer and the monitor.
If the computer is already turned on, close all open applications, then restart the computer.
2. During POST, press <F2>.
If you fail to press <F2> before POST is completed, you will need to restart the system.
The Setup Main menu will be displayed showing the Setup’s menu bar. Use the left and right arrow keys
to move between selections on the menu bar.
Navigating Through the Setup Utility
&&Use the following keys to move around the Setup utility.
• Left and Right arrow keys – Move between selections on the menu bar.
• Up and Down arrow keys – Move the cursor to the field you want.
• Pg Up and Pg Dn keys – Move the cursor to the previous and next page of a multiple page menu.
• Home – Move the cursor to the first page of a multiple page menu.
• End – Move the cursor to the last page of a multiple page menu.
• + and - keys – Select a value for the currently selected field (only if it is user-configurable). Press
these keys repeatedly to display each possible entry, or the Enter key to choose from a pop-up
menu.
NOTE: Grayed-out fields are not user-configurable.
• Enter key – Display a submenu screen.
NOTE: Availability of submenu screen is indicated by a (>).
• Esc – If you press this key:
• On one of the primary menu screens, the Exit menu displays.
• On a submenu screen, the previous screen displays.
• When you are making selections from a pop-up menu, closes the pop-up without making a
selection.
• F1 – Display the BIOS setup General Help panel.
• F2 or F3 – Press to change setup menu colors.
• F7 – Press to discard changes.
• F9 – Press to load optimized default system values.
• F10 – Save changes made the Setup and close the utility.

Acer AC100 Specifications

General

Tcase	69.1 °C
Bus type	DMI
FSB Parity	No
Processor cache	3 MB
Processor cores	2
Processor model	i3-2120
System bus rate	5 GT/s
Processor family	Intel® Core™ i3
Processor series	Intel Core i3-2100 Desktop Series
Processor socket	LGA 1155 (Socket H2)
Processor threads	4
Processor codename	Sandy Bridge
Execute Disable Bit	Yes
Motherboard chipset	Intel® C206
Processor frequency	3.3 GHz
Processor cache type	Smart Cache
Processor lithography	32 nm
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	- MHz
Processor operating modes	64-bit
Supported instruction sets	AVX
Thermal Design Power (TDP)	65 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	33
Maximum number of PCI Express lanes	16
Memory types supported by processor	DDR3 1066/1333
Memory channels supported by processor	Dual
Memory bandwidth supported by processor (max)	21 GB/s
Maximum internal memory supported by processor	32 GB
HDD size	3.5 \
HDD speed	7200 RPM
RAID levels	0, 1, 5
HDD interface	Serial ATA II
Total storage capacity	2000 GB
Maximum storage capacity	- TB
Internal memory	4 GB
Memory clock speed	1333 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	16 GB
Graphics card	HD Graphics 2000
Cabling technology	10/100/1000Base-T(X)
PS/2 ports quantity	0
USB 2.0 ports quantity	6
PCI Express slots version	2.0
Power supply	200 W
Redundant power supply (RPS) support	-
Cables included	AC
Compatible operating systems	Windows Small Business Server, Microsoft Windows Server, Red Hat Enterprise Server, SuSE Linux Enterprise Server
Sustainability certificates	ENERGY STAR
Certification	FCC B, CE, CB, UL
Chassis type	Tower
Processor ARK ID	53426
Intel Identity Protection Technology version	1.00
On-board graphics card ID	0x102
On-board graphics card model	Intel® HD Graphics 2000
On-board graphics card family	Intel® HD Graphics
On-board graphics card base frequency	850 MHz
On-board graphics card dynamic frequency (max)	1100 MHz

Weight and Dimensions

Width	- mm