Chapter 7 87
USB Configuration
When this submenu is selected, the BIOS automatically detects the all USB devices connected to the system
and displays the following items.
Onboard Graphics
Controller
Enables or disables the onboard graphics controller. Enabled
Disabled
Primary Graphics Sets the primary graphics to add-on or onboard. ADD ON
Onboard
Onboard LAN Controller Enables or disables the onboard LAN controller. Enabled
Disabled
Onboard LAN I/O ROM Enables or disables the onboard LAN I/O ROM. Enabled
Disabled
Onboard LAN I/O ROM
Option
Sets the Onboard LAN I/O ROM option. PXE
iSCSI
PCI ROM Priority In case of multiple option ROMs (Legacy and EFI compatible),
specifies what PCI Option ROM to launch.
EFI Compatible ROM
Legacy ROM
Parameter Description Option
USB Controller Enables or disables all USB devices. Enabled
Disabled
Legacy USB Support Select Enabled to use Legacy USB devices. If this item is set to Auto,
Legacy USB support will be automatically enabled if a legacy USB
device is installed in the system.
Enabled
Disabled
Auto
Port 60/64 Emulation Enables I/O port 60h/64h emulation support. Enable this feature for
complete USB keyboard legacy support for non-USB aware operating
systems.
Enabled
Disabled
Mass Storage Reset
Timeout
This setting allows you to decide how long the system should wait in
an attempt to detect the presence of a USB Mass Storage Device
before it issues a start command the system to proceed with the next
operation during POST.
10 sec
20 sec
30 sec
40 sec
Parameter Description Option