92 Chapter 7
Event Log Configuration
Change SMBIOS Event Log Settings
View SMBIOS Event Log
Press <Enter> to view the SMBIOS Event Log Records.
Boot Options
This menu allows you to configure boot settings and specify the boot sequence from available devices. Select
a submenu item, then press <Enter> to access the related submenu screen.
Parameter Description Option
Erase Event Log Choose options for erasing SMBIOS Event Log. Erasing is done prior
to any logging activation during reset.
No
Yes, Every reset
Yes, Next reset
When Log is Full Choose what to do when the SMBIOS Event Log is full. Do Nothing
Erase Immediately
Multiple Event Count
Increment
Sets the number of occurrences of a duplicate event that must pass before the multiple event
counter associated with the log entry is updated. Valid entry is a numeric value ranging from 1
to 255.
Mutliple Event Time Window The number of minutes which must pass between duplicate log entries which utilize a mutliple
event counter. Valid value is from 0 to 99 minutes.
Log OEM Codes Enables or disables the logging of EFI status codes as OEM codes (if
not already converted to legacy).
Enabled
Disabled
Convert OEM Codes Enables or disables the conversion of EFI status codes to standard
SMBIOS types (not all may be translated).
Enabled
Disabled
Parameter Description Option
Quiet Boot Enables or disables Quiet Boot option. Enabled
Disabled
Bootup Num-Lock Selects the keyboard NumLock state. On
Off
POST Error Pause Enables or disables pause during POST error. Enabled
Disabled
Option ROM Message Sets the display mode for Option ROM. Forced BIOS
Keep Current