20
2.6 Plug and Play
u The new VESA Plug and Play function is used which eliminates the complicated and
time-consuming installation process.
u You can use the Plug and Play system without encountering usual installation problems.
Your computer system can easily identify and automatically adjust the monitor.
u The LCD Monitor uses Display Data Channel (DDC) to send Extended Display
Identification Data (EDID) to the computer system, so the computer system can be set
to monitor auto adjust.
2.7 Power Saver
u Power control system, also called (Power Saver), is installed inside the LCD Monitor.
u If the monitor has not been used for a certain period of time, the system will turn the
monitor to low voltage mode to save power. Slight moving or any click will return to the
original image.
u The VGA card inside the computer handles Power Saver. You can use computer
software to set the function.
u The LCD Monitor is compatible with EPA ENERGY STAR and NÜ TEK if used with a
VESA DPMS computer.
u To save power, turn off the power of the LCD monitor when not in use.
To Next Page
Loading...
Need help?
General
