Machine Maintenance Procedures 3-29
Make sure all cables are moved away from the device to avoid damage
during removal.
LCD Module Installation 0
1. Align the LCD hinges with the hinge guides on the lower case. Refer to Figure 3-28.
2. Install and secure two (2) screws (B). Refer to Figure 3-27.
3. Secure the cables (A) to the cable guides (Figure 3-27).
4. Install the mainboard.
ID Size Quantity Screw Type
B M2.0*4.0 2
To Next Page
Loading...
Need help?
General
