38
English
LED indicators
Charging the phone
You need to charge the phone before initial use. It takes approximately four
hours for a full charge.
To charge the phone:
1. Turn the notebook on.
2. Locate the PC Card (PCMCIA) slot.
3. Insert the phone to the slot label up. Make sure that the phone is completely
pushed on the slot.
Note: The notebook detects the device and displays a New Device
Wizard window. Click No, not this time, then close the window.
4. The power/charge indicator lights up during charge and turns off when the
battery is full. Eject the phone from the PC Card slot when charging is finished.
LED Color Status Description
Bluetooth
connection/
pairing indicator
Blue Blinking
fast
The phone is in pairing mode.
Blinking slow The phone is linking with the
notebook.
Off The phone is not paired or
linked with the notebook.
Charge/Power
indicator
Amber On The phone is charging.
Off The phone is fully-charged.
Blinking The phone needs to be
recharged.
To Next Page
Loading...
Need help?
General