Acer Aspire 8930G User Manual

Chapter 2 41
Setting a Password
Follow these steps as you set the user or the supervisor password:
1. Use the w andy keys to highlight the Set Supervisor Password parameter and press the e key. The Set
Supervisor Password box appears:
2. Type a password in the “Enter New Password” field. The password length can not exceeds 8
alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the “Confirm New
Password” field.
IMPORTANT:Be very careful when typing your password because the characters do not appear on the
screen.
3. Press e.
After setting the password, the computer sets the User Password parameter to “Set”.
4. If desired, you can opt to enable the Password on boot parameter.
5. When you are done, press u to save the changes and exit the BIOS Setup Utility.
Removing a Password
Follow these steps:
1. Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set
Password box appears:
2. Type the current password in the Enter Current Password field and press e.
3. Press e twice without typing anything in the Enter New Password and Confirm New Password fields. The
computer then sets the Supervisor Password parameter to “Clear”.
4. When you have changed the settings, press u to save the changes and exit the BIOS Setup Utility.

Acer Aspire 8930G Specifications

General

Graphics	NVIDIA GeForce 9600M GT / 9700M GT
RAM	Up to 4GB DDR3
Optical Drive	Blu-ray Disc / DVD-Super Multi double-layer drive
Bluetooth	Bluetooth 2.0+EDR
Audio	Dolby Home Theater
Battery	8-cell Li-ion battery
Processor	Intel Core 2 Duo
Display	18.4-inch Full HD 1920 x 1080
Operating System	Windows Vista Home Premium
Weight	4.1 kg (9.04 lbs)
Chipset	Mobile Intel PM45 Express
Wireless	802.11a/b/g/n
Webcam	Acer Crystal Eye webcam
Card Reader	5-in-1 card reader
Ports	4x USB 2.0, HDMI, VGA, eSATA