To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if my Acer Desktop will not power on?
If your Acer Desktop is not powering on, first ensure the power cable is securely connected both to the system and the AC power source. Also, verify that the voltage selector switch is set to the correct voltage.
Why does my Acer Desktop beep continuously (one long beep)?
A continuous long beep on your Acer Desktop indicates that the memory is either not installed correctly or there is a memory error.
What does it mean when my Acer Aspire R3700 Desktop beeps once long and twice short, then repeats?
One long beep followed by two short beeps that repeat on your Acer Desktop suggests a problem with the VGA. This could mean the graphics card is not installed correctly or there is a graphics card error, a graphics card memory error, or a graphics card BIOS checksum error.
What does one long beep followed by two short beeps mean on my Acer Aspire R3700 Desktop?
One long beep then two short beeps on your Acer Desktop indicates that the BIOS is damaged.
What does two short beeps mean on my Acer Aspire R3700?
Two short beeps on your Acer Desktop indicates that the CMOS is damaged.
Detailed technical specifications of the computer's hardware.
Explanation of the system's power management capabilities.
Guide to configuring system settings via the BIOS setup.
Overview of the different menus and options within the BIOS setup.
Configuration of basic system settings like date and time.
Advanced boot options, device priority, and Num Lock settings.
Enables/disables onboard controllers like SATA, USB, Audio, and LAN.
Settings for system power states, wake-up events, and AC power loss recovery.
Manages supervisor, user, and HDD passwords for system access.
Explains beep code meanings for BIOS error reporting.
Procedure for recovering the system BIOS using a USB disk.
General