31
English
Input block
Press OK to see the list of input sources (AV, HDMI, etc.). Use the up and down directional
keys to select the input source to block and then press OK to lock. Press the OK again to
unblock an input source.
Front panel lock
Lock or unlock the keys on the side panel.
Lock installation
Lock or unlock the setup menu.
Max volume
Set a maximum volume.
Change password
You can change the default password to a 4-digit code of your choice. If you are using
parental controls, then we recommend you change the password periodically.
Clean all
Return all parental settings to default values, removing any changes.
Setup the TV
Open the Setup menu as described in the OSD navigation section. This menu provides the
following settings:
Language
Use these settings to adjust language.
Menu language
Select your desired language to display the menus.
Preferred audio language
Select a language as your preferred audio language.
Preferred audio language 2nd
Select a language as your secondary audio language.
Tuner mode
Select a tuner mode: Antenna or Cable.
Country
Select the country you live in to scan for the correct signals.
To Next Page
Loading...
Need help?
General
