Acer G195W User Manual

EN-15
Adjusting the OSD settings
--------------------------------------------------------------------
Note: The following content is for general reference only. Actual
product specifications may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the MENU key to open the OSD. You can use the OSD to adjust the
picture quality, OSD Timeout and general settings. For advanced settings,
please refer to following page:
Adjusting the picture quality
1Press the MENU key to bring up the OSD.
2Using the / keys, select Picture from the OSD. Then navigate
to the picture element you wish to adjust. Use the to Enter to the
item page.
3Use the / keys to adjust the sliding scales.
4The Picture menu can be used to adjust the current Brightness, Contrast,
Colour Temp, Auto Config and other image-related qualities.

Acer G195W Specifications

General

3D	No
Aspect ratio	16:10
Display diagonal	19 \
Display resolution	1440 x 900 pixels
Display technology	LCD
Contrast ratio (dynamic)	12000000:1
Display number of colors	-
Viewing angle, horizontal	160 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1440 x 900 (WXGA+)
On/off switch	Yes
DVI-D ports quantity	0
Product color	Black
Panel mounting interface	100 x 100 mm
Power consumption (standby)	- W
Power consumption (typical)	13.5 W

Weight and Dimensions

Depth (without stand)	117.1 mm
Width (without stand)	494 mm
Height (without stand)	400.1 mm
Weight (without stand)	3990 g