Acer G195W User Manual

EN-8
Power saving
The monitor will be driven into Power Saving” mode by the control signal
from the display controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display
Data Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
State
LED
Light
ONBlue
Power Saving
Mode
Orange

Acer G195W Specifications

General

3D	No
Aspect ratio	16:10
Display diagonal	19 \
Display resolution	1440 x 900 pixels
Display technology	LCD
Contrast ratio (dynamic)	12000000:1
Display number of colors	-
Viewing angle, horizontal	160 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1440 x 900 (WXGA+)
On/off switch	Yes
DVI-D ports quantity	0
Product color	Black
Panel mounting interface	100 x 100 mm
Power consumption (standby)	- W
Power consumption (typical)	13.5 W

Weight and Dimensions

Depth (without stand)	117.1 mm
Width (without stand)	494 mm
Height (without stand)	400.1 mm
Weight (without stand)	3990 g