Acer H243 User Manual

Acer Acer –LCD-H243H
8
Number of Pixel 1920 × 1080
Pixel Arrangement R.G.B. Vertical Stripe
Brightness 300 cd/m
2
(TYP.)
Contrast Ratio 1000 (TYP.)
Viewing Angle 170(Horizontal) / 160(Vertical)
Display Mode Normally White
Frame rate 75
Response Time 5ms (TYP. ON/OFF) / 2ms (Gray to Gray)
Surface Treatment Anti-Glare, 3H
Lamp 4
Outline Dimension 556.0(W) ×323.2(H) ×16.65(D) (TYP.)
5.2 Keypad Function
5.2.1
Control buttons on the front bezel
C
ONTROL KEY KEYS FUNCTION
[POWER] Power on or power off the monitor
[►], [◄]
A. When “Main OSD” displays, press these keys to change the contents of an adjustment
item, or change an adjustment value
B. When “Main OSD” un-displays, press [►] to show “Audio” OSD and increase the
volume, press [◄] to show “Audio” OSD and decrease the volume .
[MENU]
A. When “Main OSD” un-displays, press [MENU] to enter OSD interface.
B. When “Main OSD” displays, press [MENU] to perform function of menu icon that is
highlight or enter next level menu.
[AUTO]
A. When “Main OSD” un-displays, press [AUTO] to perform auto-adjustment
B. When “Main OSD” displays, press [AUTO] to return to previous level menu
C. When “Empowering Technology OSD” displays, press [AUTO] to exit the OSD
[e Color ]
A. When “Main OSD” un-displays, press [e Color] to show “Empowering Technology
OSD”.
B. When “Main OSD” displays, press [e Color] to exit the OSD, and to show “Empowering
Technology OSD”
[Input select]
A. Press ”input key” one time to search (a port with signal in order)
B. Show “source icon” at the same time, as searching that port
C. Go into next port automatically, if search the port without signal
D. Display it, if search the port with signal
5.3 Hot Key Operation
HOT KEY OPERATION
FUNCTION
e Color AUTO MENU
◄ ►
POWER
DESCRIPTION

Acer H243 Specifications

General

Brand	Acer
Model	H243
Category	Monitor
Language	English