Acer H6500 User Manual



H6500
 
 
 
 

* Cycle setting is based on the defect symptoms. ie: If it is NFF, the run-in time is 4 hours. You have
to set the lamp on for 50 min. and lamp off for 10 min for 4 cycles.
Note: Please make sure that the hot exhaust airows from projectors can ow towards the aisle.


 
 
 

4-5 Test Inspection Procedure
















  
  
  
  
  
  
 





  
 
 
   
Note: - After changing parts, check the information above table.
- The Default Language and Waveform Download are the same method.

Acer H6500 Specifications

General

Number of colors	1.073 billion colors
Projection distance	1.5 - 10 m
Horizontal scan range	0 - 100 kHz
Projection technology	DLP
Contrast ratio (typical)	10000:1
Screen size compatibility	0 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, vertical	-15 - 15 °
Projector brightness (economic mode)	1600 ANSI lumens
Aspect ratio	4:3, 16:9
RS-232 ports	-
Connectivity technology	Wired
Digital zoom	8 x
Optical zoom	1.2 x
Focal length range	- mm
Aperture range (F-F)	2.55 - 2.85
Lamp type	OSRAM
Lamp power	240 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	3500 h
3D	No
Full HD	Yes
Supported video modes	1080p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1920 x 1080 (HD 1080)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	- dB
Placement	Ceiling
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
Power source	AC
AC input voltage	110 - 220 V
Power consumption (standby)	- W

Weight and Dimensions

Weight	2540 g