Acer H6500 User Manual

H6500
Condential
5-2
5-2 Get into Firmware
download mode
- Hold on the "Power" and "Menu" buttons,
then plug in the power cord.
- The Temp LED and Lamp LED light red,
the Power LED light red and blue.
- Connect the projector and PC by USB cable.
- The PC will ask to install USB driver(only
for the rst time). Please refer to 5-3 for the
installation of USB driver.
Note: - The system fan and the lamp will not
operate.
5-3 Install USB driver
- Execute Program
(1) "Found New Hardware Wizard" picture
will appear on the screen.
(2) Select "Install the software automatically
(Recommended)".
(3) Click "Next".
(4) Wait for several seconds.
(2)
(3)
(1)
Lamp LED
Temp LED
USB Port
Power port

Acer H6500 Specifications

General

Number of colors	1.073 billion colors
Projection distance	1.5 - 10 m
Horizontal scan range	0 - 100 kHz
Projection technology	DLP
Contrast ratio (typical)	10000:1
Screen size compatibility	0 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, vertical	-15 - 15 °
Projector brightness (economic mode)	1600 ANSI lumens
Aspect ratio	4:3, 16:9
RS-232 ports	-
Connectivity technology	Wired
Digital zoom	8 x
Optical zoom	1.2 x
Focal length range	- mm
Aperture range (F-F)	2.55 - 2.85
Lamp type	OSRAM
Lamp power	240 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	3500 h
3D	No
Full HD	Yes
Supported video modes	1080p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1920 x 1080 (HD 1080)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	- dB
Placement	Ceiling
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
Power source	AC
AC input voltage	110 - 220 V
Power consumption (standby)	- W

Weight and Dimensions

Weight	2540 g