EasyManuals Logo
Home>Acer>Projector>H7530D

Acer H7530D User Manual

Acer H7530D
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Condential
4-2
H7530/H7530D
< Figure: Zone A, Zone B & Frame (as green line) Denition, Active area = Zone A + Zone B >
4-4 Test Condition
- Circumstance brightness: Dark room less than 2.0 lux.
- Inspection distance: 1.8 m~2.5 m functional inspection.
- Screen size: 60 inches diagonal.
- After repairing each unit, it should be Run-in (refer to the below table).
Symptom Run-in Time
Normal repair 2 hours
NFF 4 hours
Auto shutdown 6 hours
- Get into Burn-In Mode
* Cycle setting is based on the defect symptoms. ie: If it is NFF, the run-in time is 4 hours. You have
to set the lamp on for 50 min. and lamp off for 10 min for 4 cycles.
Press power→ left → left → menu
Choose BurnIn Test > enter
Lamp On (Min) Press right key to adjust the time (50)
Lamp Off (Min) Press right key to adjust the time (10)
Set Burning cycle Press right key to adjust the cycle
After setting up the time, choose ''Enter Burn In Mode'' and press "Menu" button.
Screen Defects (While replacing DMD Chip, DMD Board, Main Board)
Frame

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Acer H7530D and is the answer not in the manual?

Acer H7530D Specifications

General IconGeneral
Number of colors1.073 billion colors
Projection distance1 - 4 m
Vertical scan range0 - 85 Hz
Horizontal scan range0 - 100 kHz
Projection technologyDLP
Contrast ratio (typical)-
Screen size compatibility-, 300\
Projector native resolution1080p (1920x1080)
Projector brightness (economic mode)1600 ANSI lumens
Digital zoom8 x
Focal length range- mm
Resolution1600 x 1200 pixels
Audio input1
Aspect ratio4:3, 16:9
RS-232 ports0
Power requirements110 V AC/220 V AC
Connectivity technologyWired
Lamp typeP-VIP
Lamp power230 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)4000 h
HD-ReadyYes
Analog signal format systemNTSC, PAL, SECAM
Built-in speaker(s)No
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)- W
Noise level- dB
Product colorSilver
Market positioningHome cinema
Weight and Dimensions IconWeight and Dimensions
Weight3129 g

Related product manuals