Acer X1160P User Manual

16
English
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
• To open the OSD menu, press "MENU" on the remote control.
• When the OSD is displayed, use the keys to select any item in the
main menu. After selecting the desired main menu item, press to enter
submenu for feature setting.
• Use the keys to select the desired item and adjust the settings by
using the keys.
• Select the next item to be adjusted in the submenu and adjust as described
above.
• Press "MENU" on the remote control, the screen will return to the main
menu.
• To exit OSD, press "MENU" on the remote control again. The OSD menu
will close and the projector will automatically save the new settings.
Setting
Main menu
Sub menu

Acer X1160P Specifications

General

Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	31 - 69 kHz
Projection technology	DLP
Contrast ratio (typical)	2500:1
Projector native resolution	SVGA (800x600)
Aspect ratio	4:3
Dimensions (WxDxH)	267 x 80 x 187 mm
Power requirements	100 - 240 V
Connectivity technology	Wired
Lamp power	180 W
Light source type	Lamp
Service life of light source	3500 h
Service life of light source (economic mode)	4000 h
USB 2.0 ports quantity	1
Power consumption (standby)	5 W
Power consumption (typical)	255 W

Weight and Dimensions

Weight	2300 g