Acer X1160P User Manual

37
English
English
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.

Acer X1160P Specifications

General

Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	31 - 69 kHz
Projection technology	DLP
Contrast ratio (typical)	2500:1
Projector native resolution	SVGA (800x600)
Aspect ratio	4:3
Dimensions (WxDxH)	267 x 80 x 187 mm
Power requirements	100 - 240 V
Connectivity technology	Wired
Lamp power	180 W
Light source type	Lamp
Service life of light source	3500 h
Service life of light source (economic mode)	4000 h
USB 2.0 ports quantity	1
Power consumption (standby)	5 W
Power consumption (typical)	255 W

Weight and Dimensions

Weight	2300 g

Summary

Safety and Handling Information

Product Cleaning and Power Disconnection

Safely turn off the product before cleaning and disconnect power properly from the unit.

Electrical Power Safety Guidelines

Proper usage of electrical power, grounding, and extension cords to prevent hazards.

General Operational Safety Warnings

Avoid water, unstable surfaces, blockages, and ensure proper ventilation for safe operation.

Product Servicing and Environment

Safe Operating Environment and Practices

Avoid looking into the lens, high temperatures, humidity, dust, and ensure proper cooling.

Wireless Function and Device Usage

Wireless Device Safety and Interference

Turn off wireless devices in specific conditions; avoid interference with medical devices.

Projector Overview and Controls

Remote Control and Panel Functions

Details the functions of each button on the remote control and projector panel.

Getting Started: Setup and Operation

Connecting the Projector to Devices

Diagrams and instructions for connecting the projector using various cables.

Turning the Projector On and Off

Step-by-step guide to power on/off the projector and source devices safely.

Appendices and Troubleshooting

Troubleshooting Common Projector Issues

Guide to resolving common problems with projector operation.

Image Display Problems and Solutions

Troubleshooting steps for image-related issues like no image or incorrect display.

Specific Projector Operational Problems

Maintenance and Installation Procedures

Lamp Replacement Procedure

Detailed instructions and safety warnings for changing the lamp module.

Ceiling Mount Installation Guide

Attaching Projector to Mounting Bracket

Product Specifications and Compatibility

Technical Specifications Summary

Detailed technical data including resolution, compatibility, dimensions, and power.