Acer X1160P User Manual

18
English
Note: "Saturation" and "Tint" functions are not supported under computer
mode or DVI mode.
Image
Saturation
Adjusts a video image from black and white to fully saturated
color.
• Press to decrease the amount of color in the image.
• Press to increase the amount of color in the image.
Tint
Adjusts the color balance of red and green.
• Press to increase the amount of green in the image.
• Press to increase the amount of red in the image.
Projection Front-Desktop
• The factory default setting.
Front-Ceiling
• When you select this function, the projector inverts the image for
ceiling-mounted projection.
Rear-Desktop
• When you select this function, the projector reverses the image so
you can project from behind a translucent screen.
Rear-Ceiling
• When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Aspect Ratio
Use this function to choose your desired aspect ratio.
• Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
• 4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
• 16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.

Acer X1160P Specifications

General

Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	31 - 69 kHz
Projection technology	DLP
Contrast ratio (typical)	2500:1
Projector native resolution	SVGA (800x600)
Aspect ratio	4:3
Dimensions (WxDxH)	267 x 80 x 187 mm
Power requirements	100 - 240 V
Connectivity technology	Wired
Lamp power	180 W
Light source type	Lamp
Service life of light source	3500 h
Service life of light source (economic mode)	4000 h
USB 2.0 ports quantity	1
Power consumption (standby)	5 W
Power consumption (typical)	255 W

Weight and Dimensions

Weight	2300 g