Operations
¢
5
AV/TV MENU VOL- VOL+ CN- CH÷
2
m2
Please see the section of"Setting AIR/CABLE option ".
When you select AIR, only channels received on antenna can be selected;
When you select CABLE, channels received on cable can be selected.
1
Use Direct Channel Selector (0-9 buttons)
To select one-digit channel:
Press 0-9 digit buttons and wait for 3 seconds. For example,
you need channel 5, please input "5" button and the screen
displays "5-", the TV set goes to channel 5 in 3 seconds
To select two-digit channel:
Press two digit buttons in order to input the channel number. For
example, you need channel 20, please input "2" button,
followed "0" button and the set goes to channel 20. Be sure that
the second press should be within 3 seconds.
To select three-digit channel:
Press three digit buttons in order to input the channel number.
For example, you need channel 110, please input "1" button
twice, followed "0" button and the set goes to channel 110. Be
sure that the second and third press should be within 3 seconds.
UseCH+orCHo button
Press OH+ button, the channel number increases;
Press CH- button, the channel numberdecreases.
Use previous channel _ button
Press this button to switch between the current channel and the
previous channel.
[f you select CABLE input in the section of '!Setting AIRtCABLE
option'i, then a letter 'C, appears with the Channel number, which
indicates that the current input signal isfrom CABLE
13
To Next Page
Loading...
Need help?
General