AERMEC TCP User Manual

14
"E-CLEAR" MENU
By pressing the "E-Cleaner" button from the menu selection page ( ), you will
access the possibility of resetting system errors:
ERROR CLEAR (1/1)
Clear unit errors: Enter
Unlock discharge failure: Enter
Press the "Clear unit errors" button to access the page for deleting the errors that
have arisen on the unit:
Ok Cancel
No
Yes
Clear unit errors
 Note:
— select "YES" and press "OK" to run the error deletion procedure
— select "NO" or press "Cancel" to annul the operation
— once this function has been executed, all the online unit alarms will be reset
(only those alarms with no automatic or manual reset will remain active)
Press the "Unlock discharge" button to access the page dedicated to unit release
after an "Unlock discharge failure" error:
 NB: once this error has been eliminated, the unit will be released and can start up
again.
"GENERAL" MENU
By pressing the "GENERAL" menu icon from the menu selection page ( ), it will
be possible to set the general functions available on the unit; these functions are
divided into dierent windows, as shown in the following gures:
GENERAL (1/1)
Key tone: Off
Black light: On
System clock: Enter
Language: English
Program information: Enter
(1) Key tone:
To access the key tone setting page, press the "Key tone" button and select the re-
quired value, then press "OK" to save and quit the page or "Cancel" to quit without
saving the modications.
(2) Back light:
To access the screen backlight setting page, press the "Back light" button and select
the required value, then press "OK" to save and quit the page or "Cancel" to quit
without saving the modications.
(3) System clock:
To access the system clock setting page, press the "System clock" button and select
the required value, then press "OK" to save and quit the page or "Cancel" to quit
without saving the modications.
2019
2020
2021
2022
2023
01
02
03
04
05
08
09
10
11
12
07
08
09
10
11
39
40
41
42
43
18
19
20
21
22
2021-03-10 09:41:20 Wed.
System clock
Date and time will be displayed in the following format: YYYY - MM - DD / HH:MM:SS
The date and time can be selected by scrolling the rollers until the desired data is
obtained; pressing the top right icon will save the data, while pressing the top left
icon will clear the page; both will return the display to the top level;
(4) Language Setting:
To access the language selection page, press the "Language setting" button and
select the required value, then press "OK" to save and quit the page or "Cancel" to
quit without saving the modications.
(5) Program information:
To access the rmware information display page, press the "Program information"
button;

AERMEC TCP Specifications

General

Brand	AERMEC
Model	TCP
Category	Control Panel
Language	English