Alde Compact 3010 Operating Instruction

16. Automatic start of heater AutoOn
1 Press the button with the arrow
until the “AutoOn” symbol
ashes. “OFF” is displayed.
2 Press the +/On button. The start
time will be shown. Set according
to item 12 and press “Store”. OFF
is displayed.
3 Press the +/On button to activate
the function. Switch the boiler
off, AutoOn is displayed in
the symbol eld. The settings
are saved if the voltage to the
heater is broken when AutoOn is
activated.
With this function you can set the heater to switch on
for 24 hours at the same time every week.
For instance you can set the heater to start on Fridays
so that the vehicle is warm for weekends.
blinkar
blinkar
17. Menu Menu
blinkar
blinkar
blinkar
In the “Menu” mode, one can activate a number of functions. To activate the
function, you rst have to make the bottom row of functions light up.
To step through the different functions, use the arrow keys.
blinkar
blinkar
blinkar
blinkar
GB
OFFSET (temperature adjustment).
Using this function you can
calibrate the temperature on
the panel if you note that the
temperature (the stabilising room
temperature) is not the same as
the temperature that the panel
indicates
1 Press the button with the arrow
until the Menu symbol ashes.
Press +/On.
2 When OF is displayed, press
+/On and adjust the change in
temperature with +/On or -/Off
(+/- 5 ºC in intervals of 0.5 ºC).
3 Press Store to leave the
OFFSET function.
1 Press the button with the arrow
until the Menu symbol ashes.
Press +/On.
PUMP 12V/PUMP AU.
In the PUMP 12 mode, the 12V
pump is used, including when
230V is connected. In the PU AU
mode, 230V works the pump, and
when 230V is disconnected, the
12V pump starts. When the heater
is reset, PU AU is activated.
2 When OF is displayed, step with
the arrow key until PU AU is
displayed. Press +/On and PU 12
will be displayed.
3 Press -/Off and PU AU will be
displayed. Press Store to leave
the pump function.
Key sound
With this function, you can
connect or disconnect the key
sound to the keys. The key sound
is disconnected in the factory
settings.
2 When OF is displayed, step
with the arrow key until Sn is
displayed. Press +/On and the
button sound will be connected
up.
3 Press -/Off to disconnect the
button sound. Then press
Store to leave the button sound
function.
1 Press the button with the arrow
until the Menu symbol ashes.
Press +/On.
ashes
ashes
ashes
ashes ashes
ashes
ashes
ashes
ashes
10

Alde Compact 3010 Specifications

General

Brand	Alde
Model	Compact 3010
Category	Boiler
Language	English