16
AUS
General Safety Warnings/ Technical data
• Keep the engine speed at the level required for cutting; never increase
the engine speed above the required level.
• If grass gets caught in the cutting edge during operation or you need
to check or refuel the product, always switch off the engine.
• If someone calls for you while you are working, you must always switch
off the engine before turning towards them.
• Never touch the spark plug or cable while the engine is running. There
is a risk of electric shock if disregarded.
• Never touch the silencer, spark plug or other metal parts of the engine
while the engine is running or immediately after the engine has been
switched off. Failure to do so may result in severe burns.
• Check that the cutter has stopped rotating when the engine is idle be-
fore working with the product again.
VI. Technical data
Grass trimmer cutting data
Cutting diameter 380 mm
Thread count 2 x 2.0 mm
Max. speed 9000 min
-1
Drive
Displacement 25.4 cc
Engine idling speed range 3000 +/- 300 min
-1
Rated engine power 900 W
Fuel tank volume 0.5 L
Type of motor 2-stroke engine,
air-cooled
Weight 4.9 kg
Technical changes reserved!
Information about noise level measured in accordance with applicable standards:
Sound pressure L
pA
= 94.5 dB(A)
Sound pressure L
WA
= 108 dB(A)
Measurement uncertainty K
PA
= 3 dB(A)
To Next Page
Loading...
Need help?
General
