User Instructions
IMPORTANT: Before immersing the Pump into the water, ensure the
power cable is unwrapped and plug is clear from any damp locations.
Note: This submersible Pump must be used with a
residual current Devices with a rated residual current
of 30mA or less.
Residual Current Devices are available for purchase
online at www.extrabattery.com.au or can be
purchased at your local hardware store.
Suitable applications for the Submersible Pump
This Pump is NOT suitable for the use in spa’s, swimming pools
or similar applications.
Note: Do not use the Pump in applications in which people or
animals are present in the water during operation. It is prohibited to
operate the equipment if a person or animal is in the danger area.
This submersible Pump is suitable in the following applications:
• Water removal from rainwater tanks with access from the top
of the tank or water line.
• Irrigation and draining out ooded areas.
• Drawing water from ponds or similar bodies of water.
• Drawing water from oor pits
This submersible Pump is NOT suitable in the following applications.
Do NOT use the Pump for these purposes:
• The Pump is not suitable for use with drinking water.
• Do not use with corrosive, abrasive, explosive or dangerous liquids.
• Do not operate the Pump without water, or run the water Pump dry.
• Do not use in swimming pools, spa’s or similar applications or where
people or animals are in the water being pumped.
To Next Page
Loading...
Need help?
General
