ALLEN & HEATH AHM-16 User Manual

AHM-16/32 Getting Started Guide
16
AP12764 Issue 1
10.Processing specs
Input Processing
Zone Processing
16/32 Input Channels
Configurable mono or stereo
Up to 16/32 Zones
Configurable mono or stereo
Trim
+/-24dB digital trim
Source Selector
Up to 20 sources, variable
level, Fade In and Fade Out
time <20s
Polarity
Normal/Reverse
Insert
In/Out, +4dBu/-10dBV level
Stereo Width Control
L/R, R/L, L -Pol/R, R -Pol/L, Mono,
L/L, R,R, M/S
GEQ
28 bands 31Hz -16kHz, +/-12dB,
constant-Q
Gate
PEQ
See Input Processing
Sidechain
Self-key or source selectable, with
12dB/octave Lo-Pass and Hi-Pass
Compressor
See Input Processing
Threshold
-72dBu to +12dBu
Delay
Up to 683ms
Depth
0 to 60 dB
ANC
Attack
50us to 300ms
Ambient Level
Selectable source and metering point,
Gain Differential -18dB to 40dB
Hold
10ms to 5s
Gap
Selectable source and metering point,
Threshold -62dB to -20dB, Time 0-
5000ms
Release
10ms to 1s
Gain Element
Min / Max Gain, Rate 0-30dB/s
Insert
In/Out, +4dBu/-10dBV level
Limiter
Variable Threshold, Attack and
Release
PEQ
Type
8-Band fully parametric, +/-15dB
Speaker
Processing
Band 1 - 8
Selectable LF/HF Shelving, Bell
(variable or constant Q), Hi-Pass / Lo-
Pass
Crossovers
Configurable 2, 3, 4 way
Bell Width
0.50 – 6.00 Q
Filters
Asymmetrical, selectable 1
st
order,
Butterworth 12/18/24 db/octave, LR
12/24 dB/octave
Shelving Type
Classic Baxandall
EQ
4-Band fully parametric, or 28 band
GEQ
Hi-Pass, Lo-Pass Filter
12dB/octave
Delay
Up to 683ms
Compressor
Peak or RMS sensing
Limiter
See Zone Processing
Sidechain
Self-key or source selectable, with
12dB/octave Lo-Pass and Hi-Pass
Threshold
-46dBu to 18dBu
AMM
Compressor parameters
Threshold, Ratio, Attack, Release
Channels (AHM-16)
1x16
Channels (AHM-32)
1x32, 2x 16 or 4x 8
Delay
Up to 683ms
Modes
D-Classic gain sharing or NOM

ALLEN & HEATH AHM-16 Specifications

General

Brand	ALLEN & HEATH
Model	AHM-16
Category	Recording Equipment
Language	English