G
GG
GL
LL
L2
22
28
88
80
00
00
00
0M
MM
M
21
Allen & Heath
Specifications
Performance
Maximum XLR input level +34dBu (inc pad)
Maximum XLR output level +26dBu
Internal headroom Channels +20dB, Mix +22dB
Master meters 12 segment -30 to +16dB, 0VU= +4dBu XLR
Channel meters 4 segment -12,0,+6+16dB (5dB before clip)
Frequency response 20Hz to 50kHz +0/-1dB
Mic CMRR at 1kHz > 80dB typical
THD+n at +14dBu 1kHz Mic to mix out < 0.003%
Crosstalk at 1kHz Fader shutoff >90dB
Mute shutoff >88dB
Inter channel >90dB
Noise, rms 22Hz to 22kHz Mic EIN -128dB
Residual output noise < -96dBu (-100dB S/N)
Mix noise 24 channels < -80dBu (-84dB S/N)
Channel HPF Switched 100Hz, 12dB/octave
Output HPF Swept off to 400Hz, 12dB/octave
Channel EQ HF Shelving +/-15dB, 12kHz
HM Peak/dip +/-15dB, 500Hz to 15kHz, Q=1.8
LM Peak/dip +/-15dB, 35Hz to 1kHz, Q=1.8
LF Shelving +/-15dB, 80Hz
Mix 1-8 EQ HM Peak/dip +/-15dB, 500Hz to 12kHz, Q=1.6
LM Peak/dip +/-15dB, 80Hz to 2kHz, Q=1.6
Power supply External RPS11 IEC input
External Input for optional RPS11 backup supply
Connections
Channel XLR balanced pin 2 hot Sensitivity -60 to +14dBu
Total gain range 74dB
20dB Pad out 2k ohm, in >10k ohm
Wedge Ext in XLR balanced pin 2 hot >10k ohm, 0dBu, +20dBu max
IEM Ext in TRS unbalanced >10k ohm, 0dBu, +20dBu max
Talkback mic XLR balanced pin 2 hot Sensitivity -50 to -10dBu
Phantom power Internal jumper +48V (fitted)
Inserts Channel TRS, tip send, ring return, 0dBu
Output TRS, tip send, ring return, -2dBu
Mix 1-16 out XLR balanced pin 2 hot <75 ohm, +4dBu, +26dBu max
IEM/Wedge out XLR balanced pin 2 hot <75 ohm, +4dBu, +26dBu max
Talkback/Osc out XLR balanced pin 2 hot <75 ohm, +4dBu, =26dBu max
Headphones TRS, tip L, ring R, 30 to 600 ohm headphones recommended
Lamp 4-pin XLR max 12V 5W lamp
Mechanical
24 32 40
Width 944mm (37.2”) 1171mm (46.1”) 1398mm (55”)
Depth 650mm (25.6”)
Height 170mm (6.7”)
Weight 29kg(63.8lbs) 35kg(77lbs) 41kg(90.2lbs)
To Next Page
Loading...
Need help?
General
