GL4800 User Guide 7
The Range
GL4800-24 24 channel console
GL4800-32 32 channel console
GL4800-40 40 channel console
GL4800-48 48 channel console
Stereo models can include mic/stereo line channels
dependant on customer specification.
4 configurations are offered:
A – All mono channels (2 stereo returns are available
above the masters)
B – 4 full stereo channels to right of masters
C – 4 full stereo channels to extreme right
D – 8 full stereos to right of masters
The Integral Meterpod provides illuminated moving coil
VU metering of the groups, L, R, M (or monitors, LR
sidefill, listen wedge). Also additional PFL/AFL
indicator.
The console is supplied with a separate RPS11 power
supply, DC power cable and mains cable with moulded
plug.
The GL4800 features dual power connectors and
built-in combiner circuitry to allow two RPS11s to be
used for redundant supply backup.
GL4800-SLV2 Sys-Link V2 console expander
option kit (input only)
Circuit assembly and multi-pin connector system which
can be fitted to the console to allow simple
interconnection between two consoles so that one
becomes the slave of the second by linking the audio
busses and PFL/AFL system.
The GL4800 Sys-Link V2 option is an input-only
version, which allows the console to act as a master
console but not as a slave. Connections can be made
using two standard 37way D-type cables to any other
console fitted with a Sys-Link V2 output.
This option should be fitted only by your Allen & Heath
agent or competent service personnel.
INPUT A INPUT BSYS-LINK V2
(option)
To Next Page
Loading...
Need help?
General
