iLive Reference Guide – Firmware Part 2 - 72 AP6526-2 iss.4
Library memories
You can name, store and recall parameter settings as User libraries, or recall factory presets from the
Library pane in each processing screen.
Touch the Library button to open up the library view. Select
a Factory, User or USB item and touch Recall to recall its
settings. Touch Store New to store the current settings as a
new User library item. This open the touch keypad to enter a
name.
Libraries can be archived to computer or transferred
between iLive systems using a USB key. Press the
TouchScreen UTILITY / Configuration / Library Manager
key to work with the USB library function. If you plug in a
USB key with libraries available these will be listed in the
related Library screens. You do not need to copy them to the
Surface to work with them. Copy libraries from the iLive to
the USB key to archive or transfer them.
Note: For iLive to see the Libraries on your USB key they
must be placed in an 'allenheath \ libraries’ folder in the
root directory of your key. If libraries have been previously
transferred from an iLive to the key then the folder should
exist already.
Library types:
PEQ
GEQ
Noise Gate
Compressor
Limiter/De-esser
Full input channel processing
Full mix channel processing
FX emulations
PL-Anet setup
To Next Page
Loading...
Need help?
General
