iLive Reference Guide – Firmware Part 2 - 83 AP6526-2 iss.4
Configuration page Provides access to the memory
management, time setup and MIDI settings.
Date / Time View the current day and clock settings for the
MixRack, Surface and TouchScreen. These are stored separately and
may differ, for example if you are using a different MixRack with your
Surface. Touch the Setup button to change the settings.
Note: Accepting the changes reboots the TouchScreen
computer. The operation of the Surface is not affected while the
screen computer is booting.
Edit User Profiles View, edit and activate the settings and
permissions for the 8 User Profiles.
Library Manager Manage the User Libraries.
MIDI Set the MIDI channel number and access the MMC controls.
Show Manager Manage the Show memories.
USB Scene Transfer Import Scenes or current settings from
within a Show on a USB key.
Diagnostics page Provides status and diagnostic information.
Event Logs You can view the event log for each of the MixRack,
Surface and TouchScreen here. These log certain key events such as
power, boot and memory activity as well as system errors if they
occur. They provide a useful aid in diagnosing the system in the
event of a problem. If a yellow triangle warning icon appears in the
lower toolbar of any screen or a red cross appears in the Status
screen while using the system then go to the Event Logs to view the
error. Once viewed the yellow triangle and red cross will disappear.
If you need assistance with the error, you can plug in a USB key and
use the Store to USB button at the top of the screen to transfer the
logs to a PC to email them to our Tech Support team.
Screen Calibration This routine lets you calibrate the
TouchScreen. A timeout popup box lets you confirm the calibration.
If your calibration is inaccurate you can wait for the screen to time out
and then repeat the procedure.
USB Screen Calibration Lets you calibrate an external touch
screen monitor connected via the rear panel VGA and USB ports.
Temperature Display Displays the current temperature
measured at several points within the Surface, MixRack and power
supplies.
To Next Page
Loading...
Need help?
General
