ALLEN & HEATH QU-PAC User Manual

Qu Mixer Reference Guide 41 AP9372 iss.9
9.11 Audio Groups
The Qu-24 provides two stereo audio groups in addition to the 10 mixes. Qu-32, Qu-SB and Qu-Pac
provide 4 stereo groups. Groups are not available on the Qu-16.
Firmware V1.8 introduced Group Mix Mode. Groups can be configured as conventional stereo audio
sub-groups or as additional stereo mixes. By using groups in Mix mode the Qu-24 can provide up to 4
mono and 5 stereo mixes. The Qu-32, Qu-SB and Qu-Pac can provide up to 4 mono and 7 stereo mixes.
Select a group master Sel key while the Routing
screen is active.
Adjust the Output Balance between Left and Right
Group sockets.
Choose the Group Mode for Group or Mix operation.
The reset default is Group mode.
 Current settings will be reset when changing
mode. Confirm ‘Yes’ in the popup that appears.
Group Mode - Touch the Group mode button to
set operating mode as a stereo Audio Group. This
provides routing that follows the channel pan control.
You can assign combinations of channels and FX
returns to a group. Groups can be routed to LR or any
Mix to create sub-groups. Groups can be mixed to the
Matrix (not available on Qu-16).
Selecting Group mode resets all assignments off.
Group Settings lets you quickly assign all channels
on or off to the group as a starting point.
The Grp Processing screen identifies mode below the
name box.
The Master strip Grp Mix select buttons illuminate
purple when active in Group mode. Select a Grp mix
and assign sources to the group as shown below.
Mix Mode - Touch the Mix mode button to set
operating mode as a stereo Mix. This provides channel
send levels, dedicated pan, assignments, pre/post and
source selection to the mix. You can assign
combinations of channels, FX returns and groups to a
mix. Mixes can be mixed to the Matrix.
Group Settings lets you quickly assign all channels
on or off, and pre or post fader to the mix as a starting
point. Use the Channel Source drop-down menu to
choose the point in the signal path to send to the mix.
The Grp Processing screen identifies mode below the
name box.
The Master strip Grp Mix select buttons illuminate blue
when active in Mix mode. Select a Grp mix and assign
sources and pre/post fader as shown below.
Pre/Post
Assign
Toggle individual sources
Toggle all sources
Hold and then press Sel
Sel illuminated = Assign On or Pre-Fade
How to Assign Mixes

ALLEN & HEATH QU-PAC Specifications

General

Brand	ALLEN & HEATH
Model	QU-PAC
Category	Music Mixer
Language	English