16-EN
01GB05CDE-9873RB.fm
ALPINE CDE-9873RB 68-05946Z85-A (EN)
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press / /ENT.
(e.g. Select SUBWOOFER)
FM-LEVEL REGIONAL*
1
PI SEEK*
2
DIMMER*
3
SUBWOOFER (SUBW SYS)*
4
PLAY MODE
SCROLLTYPE TEXT SCR POWER IC AUX+ SETUP
AUX NAME*
3
DEMO FM-LEVEL
*
1
Refer to “Receiving RDS Regional (Local) Stations” (page 8).
*
2
Refer to “PI SEEK Setting” (page 9).
*
3
CDE-9873RB only.
*
4
Displayed only when SUBW is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
• Press A.SEL/R TN to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press the Rotary encoder repeatedly
to select the SUBW mode.
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
Dimmer Control (CDE-9873RB only)
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
• If your vehicle should have a dimmer control for the
dashboardlights, never connect the DIM cable (orange) of the radio
to this dimmer control.
Scroll Type Setting
Choose from two scrolling methods.
Select the type you prefer.
Scroll Setting (TEXT SCR)
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3 files, folder
names and tags.
• The unit scrolls CD text names, folder names, file names or tag
display.
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Sound Customizing
FM-LV HI (Initial setting) / FM-LV LOW
Rotary encoder
A.SEL/RTN
//ENT
FUNC./SETUP
SUBW ON (Initial setting) / SUBW OFF
SUBW BASS TREBLE BAL FADER DEFEAT
VOLUME SUBW
SUBW SYS 1 (Initial setting) / SUBW SYS 2
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the
main volume setting. For example, even at low
volume settings, the subwoofer is still audible.
Visual Customizing
DIM AUTO (Initial setting) / DIM MANUAL
SCR TYPE1 / SCR TYPE2 (Initial setting)
SCR TYPE1: The characters scroll from right to left, a single
character at a time.
SCR TYPE2: Words are built up from left to right, a single
character at a time. When the display is filled, it is
cleared and the remaining words are displayed
the same way until all words of the title have been
shown.
SCR AUTO / SCR MANU (Initial setting)
SCR AUTO: The CD text information, the text information of
folder and file names, and the tags are scrolled
automatically.
SCR MANU: The display is scrolled when a disc is loaded or
when a track is changed, etc.
SOURCE/
01GB05CDE-9873RB.fm Page 16 Wednesday, October 25, 2006 6:58 PM
To Next Page
Loading...
Need help?
General
