TO CHANGE THE HEATING PROGRAM
TO CHANGE THE COOLING PROGRAM
1. Move the MODE switch to the COOL position.
2. Repeat the steps above to Program for cooling.
HOLD TEMPERATURE / VACATION – MODELS 8363, 8365 & 8366
When the thermostat is in HOLD the set point will be maintained until the
HOLD/Resume button is pressed.
1. Press the HOLD button. The “HOLD” icon will appear on the display and
the time and day will disappear.
2. Press the
to ADJUST the temperature.
3. Pressing HOLD again will resume program.
7
WAKE – WEEKDAY
1. Move the MODE switch to the
HEAT position.
2. Press the PROGRAM button and
then
to ADJUST the
weekday WAKE time.
3. Press the PROGRAM button again
to advance to and adjust the
WAKE temperature.
LEAVE – WEEKDAY
4. Press the PROGRAM button and
then
to ADJUST the
weekday LEAVE time.
5. Press the PROGRAM button again
to advance to and adjust the
LEAVE temperature.
RETURN – WEEKDAY
6. Press the PROGRAM button and
then
to ADJUST the
weekday RETURN time.
7. Press the PROGRAM button again
to advance to and adjust the
RETURN temperature.
SLEEP – WEEKDAY
8. Press the PROGRAM button and
then
to ADJUST the
weekday SLEEP time.
9. Press the PROGRAM button again
to advance to and adjust the
SLEEP temperature.
WEEKEND – 2 or 4 Events
(See page 14)
10. Repeat the weekday steps for
the weekend events.
11. Press PROGRAM again to exit
programming. DONE will appear
on the display.
To Next Page
Loading...
Need help?
General
