APRILIA RALLY 50 - 1999 User Manual

31
use and maintenance Rally 50
+)#+34!24
For the kick start, proceed as follows:
◆
Position the vehicle on the central stand.
◆
Move to the left side of the vehicle.
◆
Turn the ignition switch (1) to position
"
n".
◆
To avoid losing control of the vehicle dur-
ing the starting, lock both wheels by
putting on the brake levers (2).
◆
Act on the kick starter (3) with your right
foot, releasing it immediately.
Neither keep the kick starter
pressed, nor act on it with the
engine on.
STARTING AFTER A LONG PERIOD OF
INACTIVITY
After a long period of inactivity, proceed as
follows:
◆
Move the ignition switch (1) to position
"n".
◆
Make the starter run for about 10 sec-
onds, in order to ensure the filling up of
the float chamber.
To start the engine:
◆
Rotate the cold start lever "e" (4) clock-
wise (outwards) (pos. A).
◆
Slightly open the throttle, then carry out
the electric starting procedure (or KICK
START).
a

APRILIA RALLY 50 - 1999 Specifications

General

Brand	APRILIA
Model	RALLY 50 - 1999
Category	Motorcycle
Language	English