62
use and maintenance Rally 50
,5"2)#!.4#(!24
Transmission oil (recommended):
0
F.C., SAE 75W - 90.
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
A.P.I. GL4 specifications.
Mixer oil (recommended):
0
GREEN HIT.
Use high-quality oils with characteristics in compliance with or superior to the ISO-L-ETC++, A.P.I. TC++ specifications.
Fork oil (recommended):
0
F.A. 5W or
0
F.A. 20W fork oil.
If you need an oil with intermediate characteristics in comparison with the two recommended products, these can be mixed as indicated
below:
SAE 10W
0
F.A. 5W 67% of the volume, +
0
F.A. 20W 33% of the volume.
SAE 15W
0
F.A. 5W 33% of the volume, +
0
F.A. 20W 67% of the volume.
Bearings and other lubrication points (recommended):
0
AUTOGREASE MP.
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30°C…+140°C,
dripping point 150°C…230°C, high protection against corrosion, good to water and oxidation resistance.
Protection of the battery poles: neutral grease or vaseline.
Spray grease for chains (recommended):
0
CHAIN SPRAY.
Brake fluid (recommended):
0
F.F., DOT 5 (DOT 4 compatible).
Use new brake fluid only.
Engine coolant (recommended)
1
:
0
ECOBLU -40°C.
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35°C at least.
To Next Page
Loading...
Need help?
General
